Skip to main content
Unique Wood Products

Spec drawing

UW-MC481SB
UW-MC481SB Double Basket Iron Baluster — 1/2" square × 44" overall, Satin Black, with dimensions.

MC481 — Two open baskets joined by a center twist with plain square ends · 1/2" Sq × 44"

Iron Balusters · 1/2" Square

UW-MC481SBDouble Basket Iron Baluster

Order # 1038301

Iron Finish2 options
Satin Black
UW-MC481SB44"

Deep black finish with a low-sheen read that keeps the silhouette crisp against stained handrail and tread work.

Sold as · Single Piece · 44"Price on Request
  • Order #1038301
  • FinishSatin Black
  • End shape
    1/2" Square
  • Length44"
  • Lead timeConfirmed at quote

A 1/2" square iron baluster with two open-diamond baskets — one upper, one lower — joined by a center twist section and plain square ends. The double-basket pattern gives the stair a strong vertical rhythm and reads as the dominant decorative piece in mixed runs with plain square balusters. Use MC481 when the stair needs traditional ironwork that feels finished on its own, especially against oak rails, stained treads, and painted risers.

Specifications

Everything on one card

  • FinishSatin Black (SB)
  • MaterialSolid iron
  • End shape1/2" square top & bottom
  • Length44"
  • Center detailTwo open baskets joined by a center twist with plain square ends
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with1/2" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-ALM06-LSB

    1/2" Square Flat Shoe — Low Sheen Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-06PC

    1/2" Square Flat Shoe — Silver Vein

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-ALPSH02-LSB

    1/2" Square Rake Shoe — Low Sheen Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-02PC

    1/2" Square Rake Shoe — Silver Vein

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-M798SB

    1/2" Square Adjustable Knuckle — Satin Black

    Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.

    View part →
Why the UW-MC481SB

Double Basket
for complete decorative field run.

Double Basket Iron Baluster is two open baskets joined by a center twist — a denser decorative profile that reads as the dominant ironwork on the stair. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.

  • Complete field pattern

    MC481 can repeat through an entire run without needing a separate accent baluster. The two baskets provide enough rhythm on their own.

  • Traditional interiors

    The double-basket pattern works with stained oak, darker rails, and painted skirt boards in classic stair packages.

  • Denser than MC482

    Use it when the single basket feels too quiet but scroll profiles would be too ornamental.

  • Landing rail continuity

    Carry the same double-basket rhythm onto level landings so the staircase reads as one connected system.

FAQ

Answers, before you ask

Can MC481 run by itself through a full stair?
Yes. The two open baskets give the baluster enough pattern to repeat as the main field piece. For quieter stairs, mix it with plain square bars.
What finish should the shoes match?
The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
How is this baluster installed?
Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
What finish options ship for this shape?
This shape ships in Satin Black and Silver Vein. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page