Skip to main content
Unique Wood Products

Spec drawing

UW-M703SB
UW-M703SB Plain Hammered Face Iron Baluster — 9/16" square × 44" overall, Satin Black, with dimensions.

M703 — Plain rod with hammered-face surface texture · 9/16" Sq × 44"

Iron Balusters · 9/16" Square

UW-M703SBPlain Hammered Face Iron Baluster

Order # 1036828

Iron Finish2 options
Satin Black
UW-M703SB44"

See the Satin Black variant page for finish-specific notes.

Sold as · Single Piece · 44"Price on Request
  • Order #1036828
  • FinishSatin Black
  • End shape
    9/16" Square
  • Length44"
  • Lead timeConfirmed at quote

A 9/16" square iron baluster with a hammered-face surface texture on the rod — a plain field baluster suited to traditional iron-baluster runs where you want hand-forged character without an ornament breaking the line. Use it as the field bar between accent shapes (knots, baskets, scrolls) to keep the stair from reading busy.

Specifications

Everything on one card

  • FinishSatin Black (SB)
  • MaterialSolid iron
  • End shape9/16" Square top & bottom
  • Length44"
  • Center detailPlain rod with hammered-face surface texture
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with9/16" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-07SB

    9/16" Square Flat Shoe — Satin Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-07ORB

    9/16" Square Flat Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-03SB

    9/16" Square Rake Shoe — Satin Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-03ORB

    9/16" Square Rake Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
Why the UW-M703SB

Plain Hammered Face
for the trade-spec iron-baluster runs UWP supplies in Houston.

Plain Hammered Face Iron Baluster — plain rod with hammered-face surface texture. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.

  • Trade-spec field runs

    Use M703 where the stair calls for plain rod with hammered-face surface texture. Match shoe finish, rake-shoe count, and epoxy quantity at quote time.

  • Mixed pattern stairs

    Pair with plain square (UW-M701 / UW-M704) balusters in alternating positions to stretch the pattern and keep the rail lighter.

  • Oak and hardwood stairs

    The Satin Black finish reads cleanly against stained oak, white oak, and painted skirt boards used in standard UWP stair packages.

  • Replacement layouts

    A direct match when retrofitting older 9/16" iron-baluster stairs of the same shape family.

FAQ

Answers, before you ask

How should M703 be mixed with plain balusters?
Use M703 as the decorative field piece, then break the run with plain square or round bars when the stair needs a quieter rhythm. A common approach is one decorative baluster between one or two plain bars.
What finish should the shoes match?
The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
How is this baluster installed?
Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
What finish options ship for this shape?
This shape ships in Satin Black, Oil Rubbed Bronze. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page