Skip to main content
Unique Wood Products

Spec drawing

UW-M701ORB
UW-M701ORB Plain Square Iron Baluster — 1/2" square × 44" overall, Oil Rubbed Bronze, with dimensions.

M701 — Straight square bar for field spacing and pattern balance · 1/2" Sq × 44"

Iron Balusters · 1/2" Square

UW-M701ORBPlain Square Iron Baluster

Order # 1036795

Iron Finish3 options
Oil Rubbed Bronze
UW-M701ORB44"
  • Satin Black
    Other M-series
  • Oil Rubbed Bronze
    Selected
  • Silver Vein
    View →

Oil Rubbed Bronze gives the rail a darker, warmer cast than Satin Black. It works best with medium-to-dark stained treads and rooms using bronze or aged metal accents.

Sold as · Single Piece · 44"Price on Request
  • Order #1036795
  • FinishOil Rubbed Bronze
  • End shape
    1/2" Square
  • Length44"
  • Lead timeConfirmed at quote

A pure 1/2" square iron bar for the parts of the rail that should not compete for attention. This is the workhorse field baluster: the piece that spaces star, twist, basket, rectangle, and scroll accents without making the staircase look overbuilt. It can also run by itself for a simple black-iron stair. Use it when the pattern needs restraint, when the handrail or newel carries the design, or when a repair needs a direct plain-bar replacement.

Specifications

Everything on one card

  • FinishOil Rubbed Bronze (ORB)
  • MaterialSolid iron
  • End shape1/2" square top & bottom
  • Length44"
  • Center detailStraight square bar for field spacing and pattern balance
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with1/2" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-ALM06-LSB

    1/2" Square Flat Shoe — Low Sheen Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-06ORB

    1/2" Square Flat Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-06PC

    1/2" Square Flat Shoe — Silver Vein

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-ALPSH02-LSB

    1/2" Square Rake Shoe — Low Sheen Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-02ORB

    1/2" Square Rake Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-02PC

    1/2" Square Rake Shoe — Silver Vein

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-M798SB

    1/2" Square Adjustable Knuckle — Satin Black

    Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.

    View part →
Why the UW-M701ORB

The plain square field bar
for spacing, restraint, and repair work.

The Plain Square is the control piece in most iron-baluster layouts. It lets the accent balusters breathe and keeps the run from collapsing into visual noise.

  • Field spacing

    Use between stars, twists, baskets, and scrolls to keep the decorative pieces readable.

  • Minimal rail layouts

    Run it alone for a clean black-iron stair with no ornamental center detail.

  • Budget discipline

    Carries long runs economically while reserving decorative balusters for the start, landing, or feature zones.

  • Repair matching

    A practical replacement part when the existing stair uses standard 1/2" square iron bars.

FAQ

Answers, before you ask

What size is this baluster?
This shape is 1/2" square and 44 inches overall before jobsite trimming. Confirm finished rail height, tread depth, and local guard requirements before cutting.
Which finish should I order?
This shape ships in Satin Black, Oil Rubbed Bronze, and Silver Vein. Keep shoes and rake shoes in the same finish family so the hardware does not draw attention away from the baluster pattern.
Why use plain bars instead of all decorative balusters?
Plain bars give the eye somewhere to rest. They also control budget and prevent accent shapes from fighting each other across the run.
How is it installed?
Most iron balusters are trimmed to length and epoxy-set into the tread and rail. Shoes can be added at the bottom and top to cover the mortise or drilled opening.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page