Spec drawing
UW-M672SB
M672 — Two forged knuckles stacked along a straight square shaft · 1/2" Sq × 44"
Iron Balusters · 1/2" Square
UW-M672SBDouble Knuckle Iron Baluster
Order # 1035549
- Satin Black
Deep black finish with a low-sheen read that keeps the silhouette crisp against stained handrail and tread work.
- Order #1035549
- FinishSatin Black
- End shape1/2" Square
- Length44"
- Lead timeConfirmed at quote
A 1/2" square hammered iron baluster with two forged knuckles stacked through the body. It carries more traditional weight than M671 and can work either as a field baluster or as a stronger feature between plain bars. The two collars break up the vertical line without turning into scrollwork. Use M672 for stairs where the iron should feel hand-worked and substantial, especially with stained wood rails, box newels, and darker stair finishes.
Everything on one card
- FinishSatin Black (SB)
- MaterialHammered iron
- End shape1/2" square top & bottom
- Length44"
- Center detailTwo forged knuckles stacked along a straight square shaft
- MountingEpoxy-set (UW-EPOXY)
- Pairs with1/2" Sq flat shoe, rake shoe
- UseInterior wood-stair balustrade
- Lead timeConfirmed at quote
- Minimum order1 piece
- WarrantySee Stair Parts warranty
Order these together
A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.
- UW-EPOXY
Baluster Epoxy
Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.
View part → - UW-ALM06-LSB
1/2" Square Flat Shoe — Low Sheen Black
Goes at the bottom of each baluster on level runs (landings, level rails).
View part → - UW-ALPSH02-LSB
1/2" Square Rake Shoe — Low Sheen Black
Goes at the bottom of each baluster on the rake (stair angle).
View part → - UW-M798SB
1/2" Square Adjustable Knuckle — Satin Black
Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.
View part →
Double Knuckle
for field or feature baluster for traditional stairs.
Double Knuckle Iron Baluster is a two stacked knuckles, weightier hand-worked feel profile. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.
Traditional field runs
M672 has enough detail to repeat through a full run while staying cleaner than scroll or basket patterns.
Feature between plains
Use it between plain square bars when the stair needs a heavier accent than a single knuckle.
Stained wood stairs
The double knuckle pairs well with dark oak, walnut tones, and substantial handrail profiles.
Landing continuity
Carry M672 onto level rails when the stair needs the same hand-worked feel around the opening.
Answers, before you ask
- Should M672 be alternated or repeated?
- Both work. Repeat it for a fuller traditional run, or alternate it with plain square bars if the stair needs more negative space.
- What finish should the shoes match?
- The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
- How is this baluster installed?
- Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
- What finish options ship for this shape?
- This shape ships in Satin Black. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
- What is the lead time?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- Do you show pricing here?
- Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
Questions people ask about iron balusters
Iron vs. wood balusters — which one for my staircase?
Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →What are the IRC stair code rules in plain English?
The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →How do I choose a stair newel post?
A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →Stair terminology glossary — tread, riser, stringer, nosing, and the rest
A staircase has more named parts than most people realize. The tread is the horizontal walking surface; the riser is the vertical board between treads; the stringer is the diagonal structural framing; the nosing is the front lip of the tread; the skirt board is the trim against the wall. Below: every term, plain English, with a note on where each one matters for ordering and installation.
Read the answer →

