Spec drawing
UW-M671SB
M671 — Single forged knuckle centered on a straight square shaft · 1/2" Sq × 44"
Iron Balusters · 1/2" Square
UW-M671SBSingle Knuckle Iron Baluster
Order # 1035543
- Satin Black
Deep black finish with a low-sheen read that keeps the silhouette crisp against stained handrail and tread work.
- Order #1035543
- FinishSatin Black
- End shape1/2" Square
- Length44"
- Lead timeConfirmed at quote
A 1/2" square hammered iron baluster with one forged knuckle at the center. The profile is restrained, but the knuckle gives the run a hand-worked traditional point of focus. It is strongest as an accent between plain bars, not as a wall-to-wall decorative repeat. Use M671 when the stair needs a blacksmith-style interruption without the heavier look of baskets, stars, or scrolls. The single knuckle sits cleanly in the sightline and keeps the rail disciplined.
Everything on one card
- FinishSatin Black (SB)
- MaterialHammered iron
- End shape1/2" square top & bottom
- Length44"
- Center detailSingle forged knuckle centered on a straight square shaft
- MountingEpoxy-set (UW-EPOXY)
- Pairs with1/2" Sq flat shoe, rake shoe
- UseInterior wood-stair balustrade
- Lead timeConfirmed at quote
- Minimum order1 piece
- WarrantySee Stair Parts warranty
Order these together
A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.
- UW-EPOXY
Baluster Epoxy
Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.
View part → - UW-ALM06-LSB
1/2" Square Flat Shoe — Low Sheen Black
Goes at the bottom of each baluster on level runs (landings, level rails).
View part → - UW-ALPSH02-LSB
1/2" Square Rake Shoe — Low Sheen Black
Goes at the bottom of each baluster on the rake (stair angle).
View part → - UW-M798SB
1/2" Square Adjustable Knuckle — Satin Black
Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.
View part →
Single Knuckle
for accent baluster between plain square bars.
Single Knuckle Iron Baluster is a one forged knuckle at center, hand-worked traditional profile. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.
Plain-bar accent
Drop M671 between plain square balusters to add a forged center mark without changing the entire stair language.
Hand-worked traditional
The knuckle reads like a small blacksmith detail, especially against oak rails and dark-stained treads.
Quiet replacement work
Useful when matching older iron layouts that used a single center collar or knuckle as the accent.
Balanced narrow stairs
The single knuckle gives narrow stair runs detail without overcrowding the baluster field.
Answers, before you ask
- How often should M671 appear in a run?
- Use it as an accent, commonly every third or fourth baluster between plain bars. Repeating it at every position can make a narrow stair feel crowded.
- What finish should the shoes match?
- The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
- How is this baluster installed?
- Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
- What finish options ship for this shape?
- This shape ships in Satin Black. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
- What is the lead time?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- Do you show pricing here?
- Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
Questions people ask about iron balusters
Iron vs. wood balusters — which one for my staircase?
Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →What are the IRC stair code rules in plain English?
The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →How do I choose a stair newel post?
A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →Stair terminology glossary — tread, riser, stringer, nosing, and the rest
A staircase has more named parts than most people realize. The tread is the horizontal walking surface; the riser is the vertical board between treads; the stringer is the diagonal structural framing; the nosing is the front lip of the tread; the skirt board is the trim against the wall. Below: every term, plain English, with a note on where each one matters for ordering and installation.
Read the answer →

