Skip to main content
Unique Wood Products

Spec drawing

UW-M506SB
UW-M506SB Double Ribbon Iron Baluster — 1/2" square × 44" overall, Satin Black, with dimensions.

M506 — Two ribbon-twist sections divided by a straight center span · 1/2" Sq × 44"

Iron Balusters · 1/2" Square

UW-M506SBDouble Ribbon Iron Baluster

Order # 1036728

Iron Finish2 options
Satin Black
UW-M506SB44"

Deep black finish with a low-sheen read that keeps the silhouette crisp against stained handrail and tread work.

Sold as · Single Piece · 44"Price on Request
  • Order #1036728
  • FinishSatin Black
  • End shape
    1/2" Square
  • Length44"
  • Lead timeConfirmed at quote

A 1/2" square iron baluster with two ribbon-twist sections. It is fuller than M505 and can carry an entire field run without needing a separate accent piece. The profile sits between traditional twist work and cleaner transitional iron, making it useful when the stair needs detail but not scrollwork. Use M506 in repeated runs, or mix it with plain bars to reduce density on smaller stairs and narrow landings.

Specifications

Everything on one card

  • FinishSatin Black (SB)
  • MaterialSolid iron
  • End shape1/2" square top & bottom
  • Length44"
  • Center detailTwo ribbon-twist sections divided by a straight center span
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with1/2" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-ALM06-LSB

    1/2" Square Flat Shoe — Low Sheen Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-06ORB

    1/2" Square Flat Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-ALPSH02-LSB

    1/2" Square Rake Shoe — Low Sheen Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-02ORB

    1/2" Square Rake Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-M798SB

    1/2" Square Adjustable Knuckle — Satin Black

    Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.

    View part →
Why the UW-M506SB

Double Ribbon
for field run for traditional-to-transitional stairs.

Double Ribbon Iron Baluster is a two ribbon-twist sections, fuller transitional pattern profile. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.

  • Full field runs

    M506 has enough ribbon movement to repeat as the main baluster pattern through a stair run.

  • Traditional-to-transitional

    The double ribbon bridges classic ironwork and cleaner updated interiors.

  • Mixed-density layouts

    Alternate with plain square bars when the stair is narrow or the handrail is visually heavy.

  • Visible landings

    The double ribbon reads clearly on level runs where the pattern is seen straight-on.

FAQ

Answers, before you ask

Can M506 be the only baluster pattern?
Yes. The two ribbon sections make it complete enough for a full field run. Use plain bars only when you want the layout to breathe more.
What finish should the shoes match?
The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
How is this baluster installed?
Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
What finish options ship for this shape?
This shape ships in Satin Black and Oil Rubbed Bronze. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page