Skip to main content
Unique Wood Products

Spec drawing

UW-M505SB
UW-M505SB Single Ribbon Iron Baluster — 1/2" square × 44" overall, Satin Black, with dimensions.

M505 — Single elongated ribbon-twist section · 1/2" Sq × 44"

Iron Balusters · 1/2" Square

UW-M505SBSingle Ribbon Iron Baluster

Order # 1036704

Iron Finish2 options
Satin Black
UW-M505SB44"

Deep black finish with a low-sheen read that keeps the silhouette crisp against stained handrail and tread work.

Sold as · Single Piece · 44"Price on Request
  • Order #1036704
  • FinishSatin Black
  • End shape
    1/2" Square
  • Length44"
  • Lead timeConfirmed at quote

A 1/2" square iron baluster with one elongated ribbon-twist section. The ribbon has more surface movement than a plain twist, but it stays lighter than a basket or scroll. It works well in transitional stair packages where the iron should soften the rail without looking ornate. Use M505 beside plain square balusters to create a measured pattern, especially in homes with cleaner trim, painted risers, and stained wood handrails.

Specifications

Everything on one card

  • FinishSatin Black (SB)
  • MaterialSolid iron
  • End shape1/2" square top & bottom
  • Length44"
  • Center detailSingle elongated ribbon-twist section
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with1/2" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-ALM06-LSB

    1/2" Square Flat Shoe — Low Sheen Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-06ORB

    1/2" Square Flat Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-ALPSH02-LSB

    1/2" Square Rake Shoe — Low Sheen Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-02ORB

    1/2" Square Rake Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-M798SB

    1/2" Square Adjustable Knuckle — Satin Black

    Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.

    View part →
Why the UW-M505SB

Single Ribbon
for transitional baluster mixed with plain bars.

Single Ribbon Iron Baluster is a one ribbon-twist section, lighter than full twist profile. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.

  • Transitional stair runs

    The single ribbon adds movement without pushing the rail into formal ornament.

  • Mixed plain patterns

    Pair with plain square bars to keep the staircase open and controlled while still showing a shaped iron detail.

  • Painted riser stairs

    The ribbon silhouette reads clearly against white risers and skirt boards without crowding the field.

  • Light traditional upgrades

    Use M505 when replacing plain bars with a small decorative step up.

FAQ

Answers, before you ask

How does M505 differ from a standard twist?
The ribbon section is broader and flatter in visual read than a compact twist. It gives more surface movement while staying lighter than basket or scroll balusters.
What finish should the shoes match?
The shoes should match Satin Black unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
How is this baluster installed?
Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
What finish options ship for this shape?
This shape ships in Satin Black and Oil Rubbed Bronze. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page