Skip to main content
Unique Wood Products

Spec drawing

UW-M456ORB
UW-M456ORB Double Sphere Iron Baluster — 9/16" square × 44" overall, Oil Rubbed Bronze, with dimensions.

M456 — Two sphere accents on hammered-edge rod · 9/16" Sq × 44"

Iron Balusters · 9/16" Square

UW-M456ORBDouble Sphere Iron Baluster

Order # 1035373

Iron Finish2 options
Oil Rubbed Bronze
UW-M456ORB44"

See the Oil Rubbed Bronze variant page for finish-specific notes.

Sold as · Single Piece · 44"Price on Request
  • Order #1035373
  • FinishOil Rubbed Bronze
  • End shape
    9/16" Square
  • Length44"
  • Lead timeConfirmed at quote

A 9/16" hammered-edge iron baluster with two spherical accents stacked through the body. The double-sphere rhythm is heavier than the single-sphere version — use it where the iron is meant to anchor the design rather than recede behind the handrail.

Specifications

Everything on one card

  • FinishOil Rubbed Bronze (ORB)
  • MaterialSolid iron
  • End shape9/16" Square top & bottom
  • Length44"
  • Center detailTwo sphere accents on hammered-edge rod
  • MountingEpoxy-set (UW-EPOXY)
  • Pairs with9/16" Sq flat shoe, rake shoe
  • UseInterior wood-stair balustrade
  • Lead timeConfirmed at quote
  • Minimum order1 piece
  • WarrantySee Stair Parts warranty
What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • UW-EPOXY

    Baluster Epoxy

    Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.

    View part →
  • UW-07SB

    9/16" Square Flat Shoe — Satin Black

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-07ORB

    9/16" Square Flat Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on level runs (landings, level rails).

    View part →
  • UW-03SB

    9/16" Square Rake Shoe — Satin Black

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
  • UW-03ORB

    9/16" Square Rake Shoe — Oil Rubbed Bronze

    Goes at the bottom of each baluster on the rake (stair angle).

    View part →
Why the UW-M456ORB

Double Sphere
for the trade-spec iron-baluster runs UWP supplies in Houston.

Double Sphere Iron Baluster — two sphere accents on hammered-edge rod. Use it according to the pattern logic of the stair: accent pieces need breathing room, while field pieces must repeat cleanly through rake and level runs.

  • Trade-spec field runs

    Use M456 where the stair calls for two sphere accents on hammered-edge rod. Match shoe finish, rake-shoe count, and epoxy quantity at quote time.

  • Mixed pattern stairs

    Pair with plain square (UW-M701 / UW-M704) balusters in alternating positions to stretch the pattern and keep the rail lighter.

  • Oak and hardwood stairs

    The Oil Rubbed Bronze finish reads cleanly against stained oak, white oak, and painted skirt boards used in standard UWP stair packages.

  • Replacement layouts

    A direct match when retrofitting older 9/16" iron-baluster stairs of the same shape family.

FAQ

Answers, before you ask

How should M456 be mixed with plain balusters?
Use M456 as the decorative field piece, then break the run with plain square or round bars when the stair needs a quieter rhythm. A common approach is one decorative baluster between one or two plain bars.
What finish should the shoes match?
The shoes should match Oil Rubbed Bronze unless the stair is intentionally using a contrast detail. On normal UWP stair packages, match the baluster, flat shoe, and rake shoe so the hardware reads as one system.
How is this baluster installed?
Most iron balusters are cut to length in the field and epoxy-set into the tread and underside of the handrail. Shoes are then used to cover the cut line and finish the connection at the rake or level run.
What finish options ship for this shape?
This shape ships in Satin Black, Oil Rubbed Bronze. Match the shoe finish to the baluster finish before ordering so the run does not split into mismatched hardware.
What is the lead time?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
All answers →

Terms used on this page