Skip to main content
Unique Wood Products

Spec drawing

UW-3000
Spec Drawing
Coming soon

The shop drawing for this profile is being refreshed. Full specs, species options, and dimensions remain accurate on this page.

UW-3000 — 1" tapered head · covers rail bolt access hole

Installation Hardware · Plugs

UW-30001" Tapered Plug

1" tapered wood plug · covers rail bolt access hole

Order # 4300075

Tapered 1" wood plug that covers the rail bolt access hole on the underside of a handrail (or the inside face of a newel). Drives in with a soft mallet; sands flush after install. Offered in White Oak — match the species to the rail/newel so the plug disappears into the assembly.

  • Plugs
  • 1" tapered wood plug · covers rail bolt access hole
  • 1" tapered · 3/8" length
  • Confirmed at quote
Availability & MaterialsUW-3000
Quote reviewedCore catalog item · confirm current availability
White Oak
1"
CodeUW-3000-WO
Choose wood species

White Oak — cooler undertone for premium / contemporary stairs. Special order, timing confirmed at quote.

Lengths & CSD CodesWhite Oak
Office orders by CSD #

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-3000
Species
White Oak
Material
Solid hardwood
Family
Installation Hardware
Profile
1" tapered wood plug · covers rail bolt access hole
Size
1" tapered · 3/8" length
Installation
Drive in with a soft mallet · sand flush after install · stain to match (optional)
Pairs with
See compatible products below
Use
Plugs · 1" tapered wood plug · covers rail bolt access hole
Lead time
Confirmed at quote
Minimum
1 piece (10-pack also available)
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-3000

1" Tapered in your stair installation kit.

1" Tapered Plug — 1" tapered wood plug · covers rail bolt access hole. Solid hardwood plug for covering fastener access holes on the visible faces of a wood-rail stair.

  • Plugs

    Cover the fastener access hole after the rail bolt or fastener is set. Sand flush after install.

  • Species matching

    Match the plug species to your rail/newel species so the plug disappears into the assembly. Cross-species plugs read as a defect.

  • Installation tool

    Soft mallet + sandpaper. No special tools required.

  • Quantity

    One plug per rail bolt or fastener access hole. Order spares — they are cheap and easy to lose.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

    Frequently asked

    What contractors actually ask.

    Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

    01What does UW-3000 do?

    1" Tapered Plug — 1" tapered wood plug · covers rail bolt access hole. Covers the access hole left by a rail bolt or other fastener on a finished wood-rail stair.

    02What species can I order?

    White Oak, on a quote-reviewed special order. Other species milled to order with timing confirmed at quote. Specify species at quote time.

    03How is it installed?

    Drive in with a soft mallet (rubber or wood-faced) until the plug is flush with the surface. Sand flush after install if the plug sits proud. Stain to match if the species is close but not exact.

    04What is the lead time?

    Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

    05Do you show pricing here?

    Not on this reference page yet. The builder/trade pricing tier is in development. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

    All answers →

    Terms used on this page