UW72 Bed Moulding
1-15/16" × 1-13/16" — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Available to order
- Lead time
- Confirmed at quote
- Price
- Priced by the foot or the piece on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Width
- 1-15/16" × 1-13/16"
- Thickness
- —
- Availability
- Special Order
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 1-15/16" × 1-13/16"
Bed Moulding · Full-length stick
PROFILE
UW72
priced by the piece on your quote
The UW72 bed moulding profile in 1-15/16" × 1-13/16" — run to order in solid hardwoods, paint-grade primed, and MDF.
Bed Moulding · Special order · Custom milling available
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Dimensions
1-15/16" × 1-13/16"A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- UW72
- Profile
- Bed Moulding
- Material
- Primed FJ Pine
- Section
- 1-15/16" × 1-13/16"
- Sold by
- Full-length stick
- Pairs with
- Matching base, casing, and crown for a coordinated millwork program.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
UW72priced by the piece on your quote
Specification · UW72
Primed FJ Pine · 1-15/16" × 1-13/16" · Bed Moulding
Where bed moulding earns its keep
Bed Moulding detail
A finished bed moulding profile for trim, panel, and millwork detailing.
Paint-grade or stain-grade
Primed FJ pine and MDF for paint; solid Red/White Oak, Maple, Pine, and Knotty Alder for stain.
Whole-project trim package
Coordinates with matching base, casing, and crown for a consistent millwork program.
Custom runs
Match an existing profile or run a custom length — our mill cuts to spec.
What contractors actually ask
- Is it stocked or made to order?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- What materials does it come in?
- Primed finger-joint pine and MDF (paint-grade), and solid Red Oak, White Oak, Maple, Pine, and Knotty Alder (stain-grade).
- What lengths?
- Primed finger-joint pine is sold by the piece in full-length sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
- Can you match an existing bed moulding profile?
- Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
More bed moulding
Questions people ask about bed moulding
Crown vs. cove moulding — what’s the difference and which one do I need?
Crown moulding is sprung — it sits at an angle bridging the wall and ceiling, with an ornate profile that can include curves, beads, and steps. Cove moulding is a single concave curve, sitting flat into the wall-ceiling corner. Crown reads as traditional and substantial; cove reads as clean and quieter. For 8-foot ceilings, cove or small crown. For 9-foot+, scale up.
Read the answer →How much trim do I need? A room-by-room calculation guide.
Calculate baseboard by measuring the perimeter of every room, subtracting door openings, then adding 10% for waste. Casing needs 17 to 20 linear feet per standard door, 14 to 17 per window. Crown takes the same perimeter as base. Shoe and quarter round match the base. The trim and casing calculator on our site does the math by room — feed in dimensions, get a total order list.
Read the answer →Paint-grade or stain-grade — how do I choose, and is poplar the right paint-grade wood?
Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →



