UW175 Brick Mould
1-5/16" × 2" — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Available to order
- Lead time
- Confirmed at quote
- Price
- Priced by the foot or the piece on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Width
- 1-5/16" × 2"
- Thickness
- —
- Availability
- Special Order
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 1-5/16" × 2"
Brick Mould · Full-length stick
PROFILE
UW175
priced by the piece on your quote
The UW175 brick mould profile in 1-5/16" × 2" — run to order in solid hardwoods, paint-grade primed, and MDF.
Brick Mould · Special order · Custom milling available
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Dimensions
1-5/16" × 2"A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- UW175
- Profile
- Brick Mould
- Material
- Primed FJ Pine
- Section
- 1-5/16" × 2"
- Sold by
- Full-length stick
- Pairs with
- Matching base, casing, and crown for a coordinated millwork program.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
UW175priced by the piece on your quote
Specification · UW175
Primed FJ Pine · 1-5/16" × 2" · Brick Mould
Where brick mould earns its keep
Brick Mould detail
A finished brick mould profile for trim, panel, and millwork detailing.
Paint-grade or stain-grade
Primed FJ pine and MDF for paint; solid Red/White Oak, Maple, Pine, and Knotty Alder for stain.
Whole-project trim package
Coordinates with matching base, casing, and crown for a consistent millwork program.
Custom runs
Match an existing profile or run a custom length — our mill cuts to spec.
What contractors actually ask
- Is it stocked or made to order?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- What materials does it come in?
- Primed finger-joint pine and MDF (paint-grade), and solid Red Oak, White Oak, Maple, Pine, and Knotty Alder (stain-grade).
- What lengths?
- Primed finger-joint pine is sold by the piece in full-length sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
- Can you match an existing brick mould profile?
- Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
More brick mould
Questions people ask about brick mould
What is brick mould, and when do I need it instead of casing?
Brick mould is exterior casing. It nails to the jamb of an exterior door or window and gives the brick, stucco or siding a clean edge to finish against. The standard face is 2 inches at about 1-1/4 inches thick, which is what pre-hung exterior units are built for — and what a replacement has to match once the masonry is laid.
Read the answer →Casing styles — colonial vs. craftsman vs. modern square. Which one for my home?
Three casing styles cover most American homes: colonial (stepped profile, traditional, the default since the 1950s), craftsman (flat board with a simple cap, square-edged, bungalow and arts-and-crafts homes), and modern square (a flat rectangle, no profile, contemporary and minimalist). Pick by the era and architecture of your home — don’t mix styles between the casing and the baseboard.
Read the answer →Paint-grade or stain-grade — how do I choose, and is poplar the right paint-grade wood?
Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →Why is a 1×6 not actually six inches wide?
Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →



