
PoplarPaint-Grade · Most Popular
Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.
1/4" × 3/4" — stocked at NW Houston / Tanner Rd in Primed FJ Pine; Red Oak, White Oak to order, or ground to match an existing profile.
Primed FJ Pine · 1/4" × 3/4"
Modern Shoe · 8' stick
ORDER CODE
142PR-8
at the Tanner Rd counter
A 1/4″ × 3/4″ low-profile shoe — a flat strip with its two face corners eased. It stands 3/4″ tall but projects only 1/4″ from the baseboard, so it covers the expansion gap with the least possible line at the floor.
Colour is indicative — grain and colour vary board to board.
A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another height, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
ORDER CODE
142PR-8at the Tanner Rd counter
Specification · UW142
Primed FJ Pine · 1/4" × 3/4" · Modern Shoe
THE ROOM STUDIO
Explore selected stocked primed mouldings together in an interactive room. Compare combinations and share your selection.
Explore the Room StudioAvailable for selected primed profiles in the collection.

Stocked profiles run primed for paint; in solid wood this one is milled to order, so the species is your choice rather than whatever is on the shelf. These are the five we run most for base shoe & quarter round — pick one in the swatches above to see this profile in it.

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.
Projects 1/4″ off the base — half the depth of the Square Shoe — for flat, contemporary baseboards where a rounded shoe would read as traditional.
Covers the gap left by floating or nail-down floors. At 1/4″ projection it covers a smaller gap than UW126 or UW128; check the gap before specifying.
Primed finger-jointed pine in 8′ sticks, on the shelf at Tanner Rd and ready for trim paint alongside a primed baseboard.
Red oak and white oak are run to order to match a hardwood floor.
Quarter round is a true quarter-circle profile — equal on both faces, typically 3/4″ × 3/4″. Shoe moulding is taller than it is wide — typically 1/2″ × 3/4″, with a softer rounded face — sitting more discretely against the baseboard. Both finish the seam between baseboard and floor. Pick shoe moulding when you want a quieter look; quarter round when you have a wider gap to cover.
Read the answer →For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →