Moulding family
Specialty Profiles
89 profiles · 89 milled to order
Not every profile belongs to a wall family. This is the rest of the knife library: the beads and coves that finish a cabinet, the astragals that meet a pair of doors, the bar rail, the screen mould, the backbands that build up a plain casing into a deeper one. Most of them are small, and most are specified by the piece rather than the room.
They are milled to order like the rest of the library, in solid hardwood or paint-grade. If the profile needed is not here, a sample or a drawing is enough: the mill grinds a knife to match and adds the section to the library.
Narrow the 89 profiles by style (4), face height (4) below, or use the catalogue's finder for a SKU.
Narrow it down

Moulding
4.528" × 0.77"
Milled to orderView profile →
Moulding
6-1/4" × 3.46"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 13/16"
Milled to orderView profile →
Moulding
5-1/2" × 1-1/16"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 0.852"
Milled to orderView profile →
Moulding
8-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 5/8"
Milled to orderView profile →
Moulding
7-1/4" × 0.725"
Milled to orderView profile →
Moulding
6-1/4" × 11/16"
Milled to orderView profile →
Moulding
6-1/4" × 1-1/2"
Milled to orderView profile →
Moulding
5-1/2" × 5/8"
Milled to orderView profile →
Moulding
7-1/4" × 11/16"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 5/8"
Milled to orderView profile →
Moulding
5-1/2" × 1/2"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
4-1/2" × 1"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 11/16"
Milled to orderView profile →
Moulding
6-1/4" × 0.714"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
4-1/2" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 7/8"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
4-1/2" × 0.594"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 13/16"
Milled to orderView profile →
Moulding
7-1/4" × 1"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
4-1/2" × 1/2"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 0.771"
Milled to orderView profile →
Moulding
8-1/4" × 0.771"
Milled to orderView profile →
Moulding
4-1/2" × 1/2"
Milled to orderView profile →
Moulding
6-1/4" × 0.781"
Milled to orderView profile →
Moulding
6-1/4" × 5/8"
Milled to orderView profile →
Moulding
7-1/4" × 1.136"
Milled to orderView profile →
Moulding
6-1/4" × 7/8"
Milled to orderView profile →
Moulding
5-1/2" × 1-11/16"
Milled to orderView profile →
Moulding
6-1/4" × 0.734"
Milled to orderView profile →
Moulding
7-1/4" × 0.734"
Milled to orderView profile →
Moulding
6-1/4" × 0.734"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 1.016"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 1.016"
Milled to orderView profile →
Moulding
5-1/2" × 1.016"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
7-1/4" × 13/16"
Milled to orderView profile →
Moulding
6-1/4" × 13/16"
Milled to orderView profile →
Moulding
5-1/2" × 13/16"
Milled to orderView profile →
Moulding
7-1/4" × 3/4"
Milled to orderView profile →
Moulding
6-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
8-1/4" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 3/4"
Milled to orderView profile →
Moulding
5-1/2" × 0.469"
Milled to orderView profile →
Moulding
6-1/4" × 0.805"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →Do you offer contractor or trade pricing on mouldings?
Yes. UWP offers trade pricing to contractors, builders, remodelers, finish carpenters, and flooring stores. Open a cash account online for immediate trade pricing. Texas resale buyers should have a completed Form 01-339 ready. We mill all our own profiles, so trade buyers also get short-run flexibility — one stick to a full house, no minimums.
Read the answer →Where can I buy hardwood mouldings in Houston?
Hardwood mouldings in Houston are available direct from the mill at Unique Wood Products. Our core catalog includes 25 baseboard profiles across four width bands, plus matching casing, base shoe, and quarter round in multiple species. Current availability, will-call, delivery, and custom knife timing are confirmed by quote.
Read the answer →Why buy from a mill instead of a big-box store?
A big-box store stocks one or two species of stair tread, a handful of generic moulding profiles, and almost no custom capability. A real mill carries six species, mills custom profiles to match existing trim, runs short orders without minimums, and has people on the phone who actually know the material. The cost difference is usually less than people expect; the expertise gap is enormous.
Read the answer →

