UW2105 Contemporary Moulding
8-1/4" x 3/4" — milled to order in Houston. Any species; ground to match an existing profile on request.
- Dimensioned section
- ANSI A shop drawing
- DXF for CAD
- Availability
- Made to order
- Lead time
- 7–14 days
- Price
- Priced by the linear foot on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
Dimensions are nominal. Milled profile is held to ±1/64″ and length to ±1/16″ — tolerances and how each is measured. Hold a sample before you commit a run.
The true section — the same closed outline that ships in the DXF.
- Profile
- Moulding
- Width
- 8-1/4"
- Thickness
- 3/4"
- Order code
- UW2105
8-1/4" × 3/4"
Moulding · Step · Plain
ORDER CODE
UW2105
quoted by the linear foot
- Chamfer
- Step
Specify this profile
Dimensions
8-1/4" × 3/4"Length is a quantity — quoted by the linear foot.
Your specification
UW2105- Order code
- UW2105
- Profile
- Contemporary Moulding · Moulding
- Section
- 8-1/4" width × 3/4" thick
- Species
- Poplar, Maple, White Oak, Walnut — others on request
- Sold by
- Linear foot · knife on file · setup by footage
- Availability
- Milled to order · 7–14 days lead time
- Finish
- Unfinished — site finish by others
The DXF is the finished section, in inches, for drawing reference. To match an existing profile instead, send us a sample or an offcut and we will grind a knife to it. Knife, setup and shop charges are on the custom moulding price schedule.
ORDER CODE
UW2105quoted by the linear foot
Specification · UW2105
Contemporary Moulding · 8-1/4" × 3/4"
Questions people ask about moulding
Why is a 1×6 not actually six inches wide?
Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →Paint-grade or stain-grade — how do I choose, and is poplar the right paint-grade wood?
Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →Do you offer contractor or trade pricing on mouldings?
Yes. UWP offers trade pricing to contractors, builders, remodelers, finish carpenters, and flooring stores. Open a cash account online for immediate trade pricing. Texas resale buyers should have a completed Form 01-339 ready. We mill all our own profiles, so trade buyers also get short-run flexibility — one stick to a full house, no minimums.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

