MI-MOULD Mantle Mould
1-1/8" × 4-5/8" — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Available to order
- Lead time
- Confirmed at quote
- Price
- Priced by the foot or the piece on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Height
- 1-1/8" × 4-5/8"
- Thickness
- —
- Availability
- Special Order
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 1-1/8" × 4-5/8"
Mantle Mould · Full-length stick
PROFILE
MI-MOULD
priced by the piece on your quote
The MI-MOULD mantle mould profile in 1-1/8" × 4-5/8" — run to order in solid hardwoods, paint-grade primed, and MDF.
Mantle Mould · Special order · Custom milling available
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Dimensions
1-1/8" × 4-5/8"A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another height, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- MI-MOULD
- Profile
- Mantle Mould
- Material
- Primed FJ Pine
- Section
- 1-1/8" × 4-5/8"
- Sold by
- Full-length stick
- Pairs with
- Matching base, casing, and crown for a coordinated millwork program.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
MI-MOULDpriced by the piece on your quote
Specification · MI-MOULD
Primed FJ Pine · 1-1/8" × 4-5/8" · Mantle Mould
Where mantle mould earns its keep
Mantle Mould detail
A finished mantle mould profile for trim, panel, and millwork detailing.
Paint-grade or stain-grade
Primed FJ pine and MDF for paint; solid Red/White Oak, Maple, Pine, and Knotty Alder for stain.
Whole-project trim package
Coordinates with matching base, casing, and crown for a consistent millwork program.
Custom runs
Match an existing profile or run a custom length — our mill cuts to spec.
What contractors actually ask
- Is it stocked or made to order?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- What materials does it come in?
- Primed finger-joint pine and MDF (paint-grade), and solid Red Oak, White Oak, Maple, Pine, and Knotty Alder (stain-grade).
- What lengths?
- Primed finger-joint pine is sold by the piece in full-length sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
- Can you match an existing mantle mould profile?
- Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
More mantle mould
Questions people ask about mantle mould
Why is a 1×6 not actually six inches wide?
Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →Paint-grade or stain-grade — how do I choose, and is poplar the right paint-grade wood?
Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →Why buy from a mill instead of a big-box store?
A big-box store stocks one or two species of stair tread, a handful of generic moulding profiles, and almost no custom capability. A real mill carries six species, mills custom profiles to match existing trim, runs short orders without minimums, and has people on the phone who actually know the material. The cost difference is usually less than people expect; the expertise gap is enormous.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →



