Chair Rail · by style
Craftsman Chair Rail
17 profiles · 17 milled to order
Flat stock with a step or a chamfer, thick enough to look like a board because it is one. Casing meets the head with a backband or a cap, not a mitre. Honest, heavy and easy to paint.
17 of the 205 chair rail profiles in the catalogue are craftsman. Each carries a dimensioned section, a spec sheet and a DXF, and any of them can be milled in solid hardwood or paint-grade. Every profile in the library exists in several families, so the matching casing, base and crown in this style are one click apart.
Other chair rail profiles

Chair Rail
3-1/2" × 3/4"
Milled to orderView profile →
Chair Rail
3-1/4" × 13/16"
Milled to orderView profile →
Chair Rail
5-1/2" × 13/16"
Milled to orderView profile →
Chair Rail
3-3/4" × 13/16"
Milled to orderView profile →
Chair Rail
2-3/4" × 3/4"
Milled to orderView profile →
Chair Rail
2-3/4" × 13/16"
Milled to orderView profile →
Chair Rail
5-1/4" × 9/16"
Milled to orderView profile →
Chair Rail
4-1/4" × 13/16"
Milled to orderView profile →
Chair Rail
3-3/4" × 13/16"
Milled to orderView profile →
Chair Rail
4-3/4" × 1-1/8"
Milled to orderView profile →
Chair Rail
5" × 0.861"
Milled to orderView profile →
Chair Rail
2-1/4" × 9/16"
Milled to orderView profile →
Chair Rail
2-1/4" × 13/16"
Milled to orderView profile →
Chair Rail
2-1/4" × 5/8"
Milled to orderView profile →
Chair Rail
2-3/4" × 13/16"
Milled to orderView profile →
Chair Rail
3-3/4" × 0.535"
Milled to orderView profile →
Chair Rail
4-1/4" × 1-7/16"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
Wainscoting styles — beadboard, shiplap, board-and-batten, raised panel. Which one for my room?
Wainscoting is wall paneling that covers the lower 30 to 48 inches of a wall. Five main styles: beadboard (narrow vertical strips with bead detail), shiplap (horizontal overlapping boards), board-and-batten (flat panels with vertical battens), flat-panel (simple recessed squares), and raised-panel (formal beveled panels). Pick on home style — beadboard for farmhouse, shiplap for coastal, raised panel for traditional formal.
Read the answer →What trim goes where? A room-by-room guide.
Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →How much trim do I need? A room-by-room calculation guide.
Calculate baseboard by measuring the perimeter of every room, subtracting door openings, then adding 10% for waste. Casing needs 17 to 20 linear feet per standard door, 14 to 17 per window. Crown takes the same perimeter as base. Shoe and quarter round match the base. The trim and casing calculator on our site does the math by room — feed in dimensions, get a total order list.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

