
PoplarPaint-Grade · Most Popular
Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.
11/16" × 23-1/4" — stocked at NW Houston / Tanner Rd in Primed FJ Pine, White Oak, Poplar, Primed MDF; Red Oak, Maple, Hickory, Pine to order, or ground to match an existing profile.
Primed FJ Pine · 11/16" × 23-1/4"
S4S Board · 16′ stick
PROFILE
1X24
priced by the piece on your quote
1X24 surfaced-four-sides board — 11/16" × 23-1/4" nominal. part of the core catalog at Tanner Rd in primed FJ pine, primed MDF, poplar, and white oak; red oak, maple, hickory, and pine surfaced to order. Smooth on all four faces, ready for casework and trim.
S4S Board · in the core catalog primed/MDF/poplar/white oak (will-call) · Other species to order
Colour is indicative — grain and colour vary board to board.
A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
1X24priced by the piece on your quote
Specification · 1X24
Primed FJ Pine · 11/16" × 23-1/4" · S4S Board
THE ROOM STUDIO
Explore selected stocked primed mouldings together in an interactive room. Compare combinations and share your selection.
Explore the Room StudioAvailable for selected primed profiles in the collection.

Stocked profiles run primed for paint; in solid wood this one is milled to order, so the species is your choice rather than whatever is on the shelf. These are the five we run most for s4s board — pick one in the swatches above to see this profile in it.

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.
Smooth-all-around solid stock for cabinets, shelves, and built-ins.
A clean S4S blank for custom trim, furniture parts, and millwork.
Red Oak, White Oak, Maple, Hickory, Poplar, and Pine — stain-grade or paint-grade.
Cut and surfaced to your spec — wider glued panels available on request.
S4S means surfaced four sides — both faces planed and both edges ripped straight and square, ready to use. S3S is surfaced three sides: both faces and one edge, with the second edge left rough so you can rip it to your own width. Rough-sawn is unsurfaced, sold by its full rough dimension, and needs a planer and a jointer before it is useful.
Read the answer →Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →UWP maintains a focused core hardwood program for stain-grade work plus paint-grade material options. Stair-tread configurators currently price five core hardwoods; exact catalog SKUs, additional species, and current material availability are confirmed at quote.
Read the answer →Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →