Moulding & trim
T-astragal
Also called astragal, meeting stile moulding
The T-section moulding fixed to one leaf of a pair of doors, covering the gap where the two meet.
A pair of doors has no jamb between them, so there is nothing for the active leaf to close against and a line of daylight down the middle. The astragal is fixed to the inactive leaf: the stem of the T sits in the gap and the head laps the other door.
The stem is sized to the door thickness, so a 1-3/8″ interior pair and a 1-3/4″ exterior pair take different astragals. Fitting one to the wrong thickness leaves either a bind or a gap.
On exterior pairs the astragal also carries the weatherstrip and, often, the flush bolts that hold the inactive leaf.
On this site
See also
More in moulding & trim
Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.

