Skip to main content
Unique Wood Products

Moulding & trim

Door stop

Also called stop moulding, door stop moulding

The thin strip fixed to a door jamb that the door closes against, hiding the gap at the edge when it is shut.

A stop is small — commonly 3/8″ to 1/2″ thick and 1-1/4″ to 1-3/4″ wide — and does two jobs: it takes the door at the end of its swing, and it hides the gap between door edge and jamb when the door is shut.

It is specified by the door rather than the room. A 1-3/8″ interior door and a 1-3/4″ exterior one want the stop set at different positions on the jamb so the face of the door finishes where the jamb edge does.

On a jamb that is to be painted the stop is often applied after the door is hung, so it can be set to the door as it actually closes rather than to the drawing.

On this site

See also

More in moulding & trim

Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.