Codes & standards
NHLA grade
Also called National Hardwood Lumber Association, FAS, Select, No. 1 Common
The hardwood lumber grading rules that define FAS, Select and the Common grades by the yield of clear cuttings in a board.
NHLA rules grade a hardwood board by how much clear, defect-free material can be cut from it, not by how it looks. FAS (Firsts and Seconds) is the top grade, with the largest clear cuttings; Select allows one poorer face; No. 1 Common and below yield smaller clear pieces and more of them.
For millwork the grade sets the raw material, and the raw material sets the price. A moulding profile milled from FAS runs longer clear lengths; the same profile from No. 1 Common needs more finger-jointing or more cutting around defects, and is what most paint-grade stock is made from.
The grade describes the board before it is milled. It says nothing about the finished profile, which is judged against the architectural woodwork standard instead.
On this site
Questions that use this term
See also
More in codes & standards
Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.

