
PoplarPaint-Grade · Most Popular
Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.
5/8" × 2-1/4" — stocked at NW Houston / Tanner Rd in Primed FJ Pine; Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex to order, or ground to match an existing profile.
Primed FJ Pine · 5/8" × 2-1/4"
Casing · 17′ stick
ORDER CODE
ACOL7303PR-17
at the Tanner Rd counter
The ACOL7303 casing profile in 5/8" × 2-1/4" — a window and door casing run to order in solid hardwoods, paint-grade primed and MDF, and a flexible version for radius openings.
Window & Door Casing · in the core catalog primed (will-call) · Special-order species
Colour is indicative — grain and colour vary board to board.
Also ordered as FJ Pine · Random length · 1030164.
A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
ORDER CODE
ACOL7303PR-17at the Tanner Rd counter
Specification · ACOL7303
Primed FJ Pine · 5/8" × 2-1/4" · Casing
THE ROOM STUDIO
Start with this profile in primed FJ pine. Explore baseboard, casing, crown, and shoe together, then share your room selection.
View ACOL7303 in Room StudioACOL7303 selected when you open the studio.

Stocked profiles run primed for paint; in solid wood this one is milled to order, so the species is your choice rather than whatever is on the shelf. These are the five we run most for casing — pick one in the swatches above to see this profile in it.

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.
Trims the jamb-to-wall reveal around doors and windows with a finished, shadowed edge.
Primed FJ pine and MDF for paint; solid Red/White Oak, Maple, Pine, and Knotty Alder for stain.
Coordinates with matching base, crown, and stool for a consistent millwork program.
Available as a flexible profile that bends to arched and radius casings.
Three casing styles cover most American homes: colonial (stepped profile, traditional, the default since the 1950s), craftsman (flat board with a simple cap, square-edged, bungalow and arts-and-crafts homes), and modern square (a flat rectangle, no profile, contemporary and minimalist). Pick by the era and architecture of your home — don’t mix styles between the casing and the baseboard.
Read the answer →Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →