
PoplarPaint-Grade · Most Popular
Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.
3-3/4" x 13/16" — milled to order in Houston. Any species; ground to match an existing profile on request.
Dimensions are nominal. Milled profile is held to ±1/64″ and length to ±1/16″ — tolerances and how each is measured. Hold a sample before you commit a run.
White Oak · 3-3/4" × 13/16"
Chair Rail · Ogee · Detailed
ORDER CODE
UW11566-375
quoted by the linear foot
Colour is indicative — grain and colour vary board to board.
Others on request — send us a sample or an offcut and we will match it.
One knife, 1 height. Length is a quantity — quoted by the linear foot.
The DXF is the finished section, in inches, for drawing reference. To match an existing profile instead, send us a sample or an offcut and we will grind a knife to it. Knife, setup and shop charges are on the custom moulding price schedule.
ORDER CODE
UW11566-375quoted by the linear foot
Specification · UW11566
White Oak · 3-3/4" height × 13/16" · Chair Rail
Rendered from this profile's own section — the same geometry as the spec sheet and the DXF, not an illustration of something similar. Milled in-house in poplar; shown here primed and in two stocked hardwoods to show the range — see the label on each.



Every profile in the library is milled to order, so the species is your choice rather than whatever happens to be on the shelf. These are the five we run most for chair rail — pick one in the swatches above to see this profile in it.

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.
Wainscoting is wall paneling that covers the lower 30 to 48 inches of a wall. Five main styles: beadboard (narrow vertical strips with bead detail), shiplap (horizontal overlapping boards), board-and-batten (flat panels with vertical battens), flat-panel (simple recessed squares), and raised-panel (formal beveled panels). Pick on home style — beadboard for farmhouse, shiplap for coastal, raised panel for traditional formal.
Read the answer →Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →Calculate baseboard by measuring the perimeter of every room, subtracting door openings, then adding 10% for waste. Casing needs 17 to 20 linear feet per standard door, 14 to 17 per window. Crown takes the same perimeter as base. Shoe and quarter round match the base. The trim and casing calculator on our site does the math by room — feed in dimensions, get a total order list.
Read the answer →Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →