Skip to main content
Unique Wood Products

General Finishes wood stain · Houston

The stain, on the same ticket.

UWP carries the General Finishes oil-based, gel and water-based wood stains at the NW Houston / Tanner Rd counter — 53 colors across three lines, in quarts and smaller cans. Pick it up with your treads, stair parts or moulding.

  • Quarts and smaller cans — no gallons
  • Counter sale at Tanner Rd
  • Call to confirm your color

Oil-based liquid

General Finishes Oil-Based Penetrating Wood Stain

A thin wipe-on stain that soaks into raw wood. The traditional choice for oak treads, handrails and stain-grade trim, with a long open time that keeps lap marks off a long run.

Best on
Raw oak, ash and other open-grain hardwoods
Sizes
Half-pint and quart

14 colors

  • Natural
  • Honey Maple
  • Pecan
  • Salem
  • Danish Teak
  • American Walnut
  • Antique Cherry
  • Candlelight
  • Warm Cherry
  • Mahogany
  • Spiced Walnut
  • Mocha
  • Slate
  • Flint

Oil-based gel

General Finishes Oil-Based Gel Stain

A heavy-bodied stain that sits nearer the surface than a liquid. It gives deep, even color on woods that blotch — maple, pine, poplar — and stays put on vertical work such as newels and balusters.

Best on
Maple, pine and poplar; vertical surfaces
Sizes
Pint and quart

15 colors

  • White
  • Ash Gray
  • New Pine
  • Prairie Wheat
  • American Oak
  • Colonial Maple
  • Nutmeg
  • Candlelite
  • Antique Walnut
  • Brown Mahogany
  • Georgian Cherry
  • Java
  • Gray
  • Carbon Gray
  • Black

Water-based

General Finishes Water-Based Wood Stain

Low odor, fast drying and cleaned up with water. The pigments lay down a uniform color on hard-to-stain woods, and the grays and pale tones do not amber the way an oil stain does.

Best on
Occupied homes, gray and pale finishes, quick recoats
Sizes
Pint and quart

24 colors

  • Whitewash
  • Pre-Stain Natural
  • Natural Oak
  • Washed Gray
  • Golden Oak
  • Antique Oak
  • Graystone
  • Driftwood
  • Tumbleweed
  • Pecan
  • Walnut
  • Hickory
  • Antique Brown
  • Graphite
  • Sedona
  • Black Cherry
  • Red Mahogany
  • Brown Mahogany
  • Provincial
  • Cabernet
  • Tobacco
  • Espresso
  • Onyx
  • Black

Clear finish

General Finishes Topcoats

UWP also carries General Finishes clear topcoats — oil-based and water-based — to go over the stain. An oil-based topcoat adds warmth and suits oak treads and handrails; a water-based topcoat stays clear over gray and pale stains and recoats the same day. Keep the topcoat compatible with the stain under it, and let an oil stain cure fully before a water-based coat goes on.

Call (713) 462-5045 for the sheen and can size on the shelf.

Color names follow the manufacturer’s current color card and can change. The chips are screen approximations of each stain on oak, not a match — test on your own wood. Color on the shelf varies — call before you make the trip. General Finishes is a trademark of its owner; UWP is a counter retailer of the product.

What it goes on

Unfinished, ready for your finish.

Frequently asked

Wood stain, answered.

Lines, sizes and which stain suits which wood.

Which General Finishes stains does UWP carry?
All three stain lines: the oil-based penetrating wood stain, the oil-based gel stain and the water-based wood stain. Call (713) 462-5045 with the color name and we will confirm it is on the shelf before you drive over.
What can sizes do you sell?
Quarts in all three lines. The oil-based penetrating stain also comes in half-pints; the gel and water-based stains in pints. UWP does not carry gallons.
Can I order stain online?
No. Stain is sold at the will-call counter at 9915 Tanner Road, Monday to Friday 7:30 AM to 4:30 PM and Saturday 8:00 AM to noon. It can go on the same ticket as your treads, stair parts or moulding.
Which stain should I use on red oak stair treads?
Oil-based penetrating stain is the usual choice on red and white oak: it soaks into the open grain and gives you time to wipe a full tread evenly. Use gel stain on maple, pine or poplar parts, which blotch under a thin stain. Always test on an offcut of the same species first.
Does UWP stain or finish the wood?
No. Treads, stair parts and moulding leave the mill unfinished — site finish by others. The stain is sold for your finisher or for you to apply on site.
Will the color match the name on the can?
Only on the species it was sampled on. The same stain reads differently on red oak, white oak, maple and pine. Take a species sample from the counter and test before committing to a stair.