See your floor, before you order.
FLOOR · WALL · CEILING — LIVE BOARD-TILING PREVIEW
Input from
Long dimension of the room.
Short dimension of the room.
Use *actual* face width — for nominal 1×6, enter 5.5".
Visual only. UWP custom mills typically 6–12 ft.
Industry standard: 10–15%.
YOUR FLOOR
14.0′ × 11.0′ · Top-down view · planks run along the long axis
Dimensions follow your inputs. Wood tone and room styling are illustrative.
Net surface area
154.0 sq ft
Exact area
Linear ft (exact)
336.0
5.5" face width
Linear ft (order)
369.6
Includes 10% waste
Visual is a scaled representation. Board placement, butt joints and grain are illustrative — final mill list is built per order.
Reference
Square feet, linear feet, and the width that trips people up
- How do you convert square feet to linear feet?
- Divide the square footage by the board’s face width in feet. For a 5-1/4" board, that is 5.25 ÷ 12 = 0.4375 ft, so 200 sq ft ÷ 0.4375 = 457 linear feet. Use the actual face width, not the nominal size — a "1x6" covers 5-1/2", not 6".
- How do you convert linear feet to square feet?
- Multiply the linear feet by the board’s face width in feet. 500 linear feet of 5-1/2" board is 500 × (5.5 ÷ 12) = 229 sq ft. The calculator above does this in both directions and shows the layout to scale.
- Why does nominal width give the wrong answer?
- Nominal sizes describe the board before milling. A nominal 1x6 finishes at 5-1/2" and a 1x4 at 3-1/2", and tongue-and-groove loses more to the tongue — the face you actually see may be 5-1/8". Using the nominal number over-states coverage by roughly 8–10%, which is how jobs come up short.
- How much waste should I add?
- For a straight run in a rectangular room, 7–10% covers offcuts and defect. Diagonal or herringbone layouts, and rooms with many openings or angles, run 12–15%. The calculator adds your waste percentage on top of the net coverage rather than burying it in the total.
- Does this work for walls and ceilings as well as floors?
- Yes. Shiplap and tongue-and-groove are the same arithmetic — area divided by face width. Choose wall or ceiling above and the preview reorients so the board run matches how the material will actually be installed.

