============================================================================== SECTION 06 43 00 WOOD STAIRS AND RAILINGS ============================================================================== Guide specification issued by Unique Wood Products, Houston, Texas. 9915 Tanner Road, Houston, TX 77041 · (713) 462-5045 HOW TO USE THIS SECTION Items in [brackets] are choices for the specifier. Each is a decision this document deliberately leaves open, not an omission — resolve or delete every bracket before issuing. Edit freely; this is a starting draft for your project manual. Tolerances and grade referenced below are published commitments and are stated with the method by which each is measured at https://www.uniquewoodproducts.com/professionals/standard. ============================================================================== PART 1 - GENERAL 1.01 Section includes solid hardwood stair treads, risers, landing tread, starting steps, handrails, fittings, newels, balusters and related trim. 1.02 Submittals: manufacturer product data; shop drawings showing tread depth, nosing profile, riser height, returns and species; DXF or DWG profile sections; one 12″ sample of each tread profile and handrail profile in the specified species. 1.03 Quality assurance: fabricate to the Architectural Woodwork Standards (AWS), Custom grade minimum, Premium grade where scheduled. Fabricator to have milled solid hardwood stair parts for not less than 10 years. 1.04 Delivery and storage: deliver after wet work is complete and HVAC is operating; store flat in the conditioned space at 35–55% RH. 1.05 Field conditions: verify stair rise and run, stringer layout and finished floor thickness before fabrication; dimensions on shop drawings govern. PART 2 - PRODUCTS 2.01 Basis of design: Unique Wood Products, 9915 Tanner Road, Houston, TX 77041; (713) 462-5045. 2.02 Species: [Red Oak] [White Oak, rift or plain sawn] [Hickory] [Hard Maple] [Walnut] [Poplar, paint grade]. Hardwood lumber graded to NHLA rules, FAS / Select for clear-grade work. 2.03 Moisture content: 6–9% at time of delivery. 2.04 Treads: solid edge-glued hardwood, [1″] [1-1/16″] [1¾″ EGU] thick × [11½″] deep × length as scheduled; nosing [bullnose, 1¼″ projection, 9/16″ radius maximum] [eased square edge]; returned end on open sides. 2.05 Risers: solid hardwood or paint-grade poplar, ¾″ thick, height as scheduled. 2.06 Handrail: solid hardwood profile [UW-6010] [UW-6210] [UW-6710] [UWP Original UW96xx], meeting IRC R311.7.8.5 / IBC 1014.3 as [Type I] [Type II]; plowed for square balusters with matching fillet where scheduled. 2.07 Newels and balusters: as scheduled; iron balusters hollow steel with satin-black powder coat and matching shoes. 2.08 Fabrication tolerances: profile ± 1/64″; length ± 1/16″; tread depth ± 1/32″ within a flight. PART 3 - EXECUTION 3.01 Install per the UWP Stair Tread & Riser and Handrail & Newel installation guides and the approved shop drawings. 3.02 Set treads in polyurethane construction adhesive with mechanical fasteners; risers glued and fastened to stringers; no more than 3/8″ variation in riser height or tread depth within a flight. 3.03 Handrail height 34″–38″ above the nosing line, continuous, ends returned or terminated at newels; guard openings to reject a 4″ sphere. 3.04 Finish: sand to 150 grit; seal all faces; apply the scheduled finish system. ============================================================================== END OF SECTION 06 43 00 ============================================================================== Source: https://www.uniquewoodproducts.com/professionals/specifications Free to edit and incorporate into a project manual. Confirm current content against the source before issuing.